Nuaire's Axus run and standby Axial fan is part of our high performance Axial range of units providing guaranteed ventilation for high temperature applications.

Developed to provide optimum performance for each case size. This high temperature smoke fan has up to 45 m3/s duty range. 

Tel: 02920858200
Email: Email Us

After Sales Support
Tel: 02920858400
Email: Email Us

Nuaire's Axus run and standby axial fan is designed to ensure emergency ventilation in case of fan failure. 

Features & Benefits:

  • Guaranteed Emergency Ventilation - Run and standby fan ensures emergency ventilation in the case of fan failure
  • High Performance - Developed to provide optimum performance for each case size; 16 Case diameters 315 - 1600mm, Airflow - up to 45m/s, Static pressure - up to 780 Pa. Operating temperature, 300ºC and 400ºC for 2 hours
  • High Temperature - Units are suitable for smoke reservoir and non smoke reservoir applications - EN 12101-3:2015. Units are dual purpose for day to day plus ‘one off’ emergency use
  • Tested To the highest standards - Air performance to BS848 (part 1) 2007 and IS0 5801:2017
  • Acoustic Performance - To AMCA300
  • Flexible Solution - Units can be installed at any angle
  • Matching Attenuators & Ancillaries - AV mounts, flexible connectors, mounting Brackets, Matching Flanges, Inlet Cones, Guard, backdraught damper
  • Available Options - AXUS units suitable for two speed operation (full and half speed). AXUS units available with access doors suitable for cleaning and observation

Axus circular inline axial flow fan manufactured from pre-galvanized mild steel for sizes 250-1250 diameter. 1400 diameter and above are manufactured from mild steel with hot dip galvanized finish. Run and standby fan incorporates inlet and outlet flanges with pre-drilled bolt holes, and an external terminal box to IP55. The motor is totally enclosed and protected to IP55, foot mounted options for class 'F'/ class ‘H’ insulated and has sealed for life ball bearings. Blades manufactured from cast aluminium alloy mounted in a die cast aluminium alloy hub as standard on AXT-I models blades are injection moulded GRP mounted in a die cast aluminium alloy hub as standard.

A7 option - Day to day operation up to ambient temperature of 60°C and once off at 300°C and 400°C for 2 hours. D.O.L starting is recommended.

  • Car Parks
  • Smoke Ventilation
  • Tunnels
  • Apartments & Flats
  • Industrial
  • Mounting bracket
  • Matching flanges
  • Flexible connections
  • Anti vibration mounts
  • All necessary components for ease of installation