Skip to main content


OEM Agriculture

Axus Agriculture

Nuaire's Axus is a range of comprehensive Axial fans manufactured to cater for the demanding process requirements for the crop and produce drying application.

Agricultural Requirements

Nuaire has developed a comprehensive range of Axial fans catered to meet your project volume flow and variable pressure requirements. Our vast experience and proven record gives you the added benefit of knowing that we will always find the most appropriate solution for your needs. All units are manufactured to be corrosion resistant.

Axial Fan Range

The Axus Long, medium or short case axial range is available in a wide range of diameters from 250-1800mm, with volume flow rates ranging from 0.1 to 40m3/s. All units are manufactured from hot dip galvanised steel as standard, with stainless steel 304 & 316 available on request.

A wide range of adjustable pitch aerofoil & sickle impeller designs to cater for your air performance, sound and efficiency demands. Purpose designed electric motors available in a Foot or Pad mount construction suitable to operate from -50 to 60 Deg.C (Stop/Start). All motors are complete with PTO thermostats, constructed to IP56 with motor drain holes and self-finish aluminium ensuring a paint free construction.

Axus Long Case  - Axial Fan

By Application 

  • Dyers for: Grain / Barley / Wheat / Oil Seeds / Cereals / Coffee / Vegetables / Fruit
  • Coolers for potatoes: Ventilation in Horticultural & Livestock


The range comes with a wide range of ancillaries to suite your project requirements. 

IE3 Efficiency - Motor fitted as standard, IE3 & 1E4 also available on request

Dual Frequency - 50/60Hz (400/460/3/60Hz) with an option for spot wound 380/3/60Hz motors

Motor PTO thermostats & drain - Holes included as standard to eliminate on-site service & warranty issues

Anodised aluminium - Finish motor as standard, ensuring a paint free construction eliminating the potential for paint particles contaminating process

Case Design - Short case, long case or Bellmouth inlet

Size - Short, medium & long fan case executions are available, fabricated from hot dip galvanised steel after manufacture as standard. Stainless steel optional available on request

ISO 5801:2017 Type: D (Ducted) & Type: A (Open Inlet/Outlet), air performance & sound, representative to meet you’re application

-50/+60ºC (Stop/Start) minimum operating temperature as standard

Get In Touch
We understand terminology and technical information sometimes can be difficult to digest on paper, why not contact our dedicated team to provide you with optimum support for your project requirements.
Read More