The DRI-ECO-HEAT-HC provides whole home ventilation using the Positive Input Ventilation principle. Essentially the concept is to introduce fresh, filtered air into the dwelling at a continuous rate, encouraging movement of air from inside to outside. To achieve this, the unit is mounted in the loft space, drawing air through the filters and inputting it, at ceiling level, into the property. An integrated heater tempers airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home.
This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof.
Our range of DRIMASTER-ECO units are fitted with an internal temperature sensor. This sensor continuously monitors the temperature in the loft, boosting the air volume when the loft temperature is above a set level.
If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within.
Commissioning can be carried out via the controls cited within the ceiling diffuser.
This unit's integral radio frequency receiver allows additional functions with optional remote and wired sensors and switches, listed below.
Choice of sensors include:
DRI-ECO-4S. A 4 switch controller that can be located anywhere within the property and allows manual control over the units boost function as well as the fitted heater.
DRI-ECO-CO2. A Carbon Dioxide detector which must be wired in to the properties mains power supply. This sensor will trigger the units boost function should Carbon Dioxide levels rise above a set point within the home, therefore increasing the airflow and forcing the polluted air out of the property
DRI-ECO-RH. A Remote Humidity sensor that measures the levels of humidity in the home and prompts the unit to enter boost mode, increasing the airflow and bring RH levels back to a comfortable level.