• The UNI-X range meets the needs of student accommodation designers, setting the range apart with higher efficiency, lower SFPs and class-leading noise levels.

    Features & Benefits:

    • High efficiency heat exchanger - Counter flow heat exchanger with efficiencies up to 90% (Eurovent Certified)
    • Low specific fan power - High efficiency ErP 2018 EC blowers with IP 54 rating and stepless speed control
    • Class leading noise levels - Unique casing design with internal profiling and external acoustic cladding ensures lower noise levels
    • Automatic 100% bypass facility - Guarantee’s the delivery of fresh, clean air in the summer months
    • Simple control in-built control - Factory tested, provides trickle/boost/individual adjustment of maximum duties. Choice of boost switches available
    • Space saving low profile unit - Designed for ceiling voids. All units have a maximum depth of 294mm
    • Easy to maintain - G3 filters fitted as standard to both supply & extract air paths and can be accessed from underside of unit. Carbon filter options are available
    • Quick to install - An adhesive ‘positioning template’ is supplied with every unit to ensure a quick installation
    • Warranty - Peace of mind UNI-X range has a 2 year warranty
  • The unit shall be positioned as indicated on the drawings and shall be in accordance with the particular fan schedule in the specification.

    The combined supply and heat recovery unit shall supply filtered fresh air to each to the habitable rooms whilst extracting moisture-laden air from wet area’s e.g Bathrooms.

    The supply air shall be tempered via the counterflow heat exchanger. The unit shall boost its speed and therefore the ventilation rate as it receives a signal from light/remote switch. The unit shall have a secondary boost speed in addition to the standard boost speed.

    The unit shall have the facility to commission the supply and extract fan independently at all 3 speeds.

    UNITS WITH RECTANGULAR SPIGOTS

    UNI-X220: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    UNI-X360: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    UNI-X580: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    UNITS WITH CIRCULAR SPIGOTS

    UNI-X220-C: The unit shall be suitable for Ø150mm Circular ducting.

    UNI-X360-C: The unit shall be suitable for Ø150mm Circular ducting.

    UNI-X580-C: The unit shall be suitable for Ø150mm Circular ducting.

    • Student accommodation
    • Care homes
    • Meeting rooms
    • Small offices
  • The unit shall be positioned as indicated on the drawings and shall be in accordance with the particular fan schedule in the specification.

    The combined supply and heat recovery unit shall supply filtered fresh air to each of the habitable rooms whilst extracting moisture-laden air from wet area’s e.g. Bathrooms.

    The supply air shall be tempered via the counterflow heat exchanger. The unit shall boost its speed and therefore the ventilation rate as it receives a signal from light/remote switch. The unit shall have a secondary boost speed in addition to the standard boost speed.

    The unit shall have the facility to commission the supply and extract fan independently at all 3 speeds. – for full specification refer to brochure.

    Units with rectangular spigots

    UNI-X220: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    UNI-X360: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    UNI-X580: The unit shall be suitable for 220 x 90mm Rectangular ducting.

    Units with circular spigots

    UNI-X220-C: The unit shall be suitable for Ø150mm Circular ducting.

    UNI-X360-C: The unit shall be suitable for Ø150mm Circular ducting.

    UNI-X580-C: The unit shall be suitable for Ø150mm Circular ducting.

  • I&M UNI-X - High Performance Heat Recovery UnitDownloadI&M UNI-X-BT / UNI-X-TT - Switches for UNI-X unitsDownloadUNI-X Consultant SpecificationDownload